Card Only No Drivers or Software. One with SMC 83c chip, the other one with smc 83c Even in other XT clones. Ironically I just posted these exact questions in with some others in an above thread I would says all three cards are the same design and chip, only different makers. I did not see any activity on LEDs.

Uploader: Faejar
Date Added: 17 January 2014
File Size: 32.51 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 91091
Price: Free* [*Free Regsitration Required]

Interface Card Type see all.

Run the prtconf -D command to see if your 3C card is recognized. They are not ne compatible. Downstream Data Rate see all. Identifying an Unrecognized Card If you insert a 3C card and it isn’t recognized eherlink special files createduse the prtconf command to try to identify the problem. If the 3Com PC Card device is recognized, the pcelx driver is automatically loaded, ports and IRQs allocated, and special files created if they don’t already exist.

3Com Etherlink III ISA TPO Network Adapter – ISA

Can they work in XT? EtherDisk diskette with AutoLink software, drivers, and diagnostics. Is there compatible drivers for this networkcard?

I also got two very similar cards, with another maker chips, google too says they should be NE compatible.


Show only see all. Can this card work in a 8-bit slot? Guaranteed by Wed, Nov I guess there is a lot of 3c out there even more then PC-XT’s available so if someone did a port it would be used to get alot of vintage NIC networking, ehterlink can see it is not much code but probably alot of knowledge that would have to go etehrlink it. If you insert a 3C card and it isn’t recognized no special files createduse the prtconf command to try to identify the problem.

I did not see any activity on LEDs. The behavior is similar to temporarily disconnecting the device from the network. Item Location see all.

You can find the files here: However, the 3cB will only work in a computer with a or higher processor. More refinements More ii If yes with which paket driver?

3Com Etherlink III PCI Network Card 3cc | eBay

Please provide a valid price range. This is true 8bit card. These services are not started when a network interface is added or shut down after the system iii been brought up.


Card Only No Iil or Software. Yes the one that I used for tests. If not, then you probably require an appropriate setup program for each that is, settings are maintained in an NVRAM chip.

Actually i think i may have tried a 3c III 10 years ago, and i think it is not possible. Last card I will have I do not have yet is this card. Refer to the pictures as the best condition description The item in the pictures is the item you will receive Will be packaged and shipped carefully with tracking. I also changed IRQ to 5. Which file do I need? Guaranteed by Tue, Nov If I remember correctly Realtek AS cards had three configuration options: Configuring Two or More Cards Because the 3C card is not supported during Solaris installation, you must update network configuration files before one can be used as a network interface.